Search

Search Results

1. Cathodic corrosion as a facile and universal method for the preparation of supported metal single atoms

   Top-down strategy has been generally adopted for preparation of metal single atom catalysts (SACs) due to the simplified synthetic process, metal...

   Rui Li, **gsong Xu, ... Wenhua Luo in Nano Research

   Article 12 August 2021
   

2. Stress Corrosion Susceptibility and Electrochemical Characteristic of X80 Under a Disbonded Coating in a Low-pH Soil Solution with Cathodic Protection

   The stress corrosion cracking (SCC) susceptibility and electrochemical characteristic of X80 under a disbonded coating in a low-pH soil solution with...

   Chao Liu, Zongshu Li, ... **aogang Li in Journal of Materials Engineering and Performance

   Article 05 November 2021
   

3. Synergistic Effect of Sulfate-Reducing Bacteria and Cathodic Protection Potential on Hydrogen Permeation and Stress Corrosion Cracking of X100 Steel in the Maritime Mud Environment

   Submarine pipelines buried in marine mud are often affected by cathodic protection (CP) potential and sulfate-reducing bacteria (SRB). In this study,...

   Jiahang Li, Fei **e, ... Ming Wu in Metallurgical and Materials Transactions A

   Article 21 February 2022
   

4. Unlocking the Potential of Cinnamaldehyde: A Comprehensive Study on Its Dual Role as an Effective Inhibitor Against Corrosion and Microbial Corrosion of Mild Steel in Saline Environments

   In this investigation, the application of cinnamaldehyde (CIN) on carbon steel under aggressive saline conditions (3.5% w/w NaCl solution) at ambient...

   Waleed M. Saad, A. M. El-Shamy in Journal of Bio- and Tribo-Corrosion

   Article 29 January 2024
   

5. Effect of Mn Addition and Heat Treatment on the Corrosion Behaviour of Mg–Ag–Mn Alloy

   The high corrosion sensitivity and the potential bio-toxicity of Mg–Ag alloys limit their wide applications for the production of implanted devices....

   You Lv, Yupeng Zhang, ... **nxin Zhang in Acta Metallurgica Sinica (English Letters)

   Article 19 December 2023
   

6. Corrosion Behavior of Cast Iron in Engine Coolant

   Electrochemical impedance spectroscopy, potentiodynamic polarization curves, and the Mott–Schottky method were used to study the corrosion behaviors...

   Yadong Li, Changzeng Luo, ... Jianjun Pang in Journal of Materials Engineering and Performance

   Article 31 July 2023
   

7. Investigating Effect of ECAP Process on Corrosion Behavior of WE43 Magnesium Alloy in Simulated Body Fluid

   Corrosion of WE43 magnesium alloys after equal-channel angular pressing (ECAP) process with one pass (1P), two pass (2P), three pass (3P) and four...

   E. Naderi, A. Davoodi, H. R. Jafarian in Metals and Materials International

   Article 12 May 2023
   

8. Influence of Micro/Nano-Ti Particles on the Corrosion Behavior of AZ31-Ti Composites

   Adding Ti particles to magnesium alloy simultaneously enhances its strength and ductility. However, how these particles influence on Mg alloy’s...

   **chao Jiao, ** Zhang, ... Fusheng Pan in Acta Metallurgica Sinica (English Letters)

   Article 30 October 2023
   

9. The Early-Stage Propagation of Localized Corrosion of a Sintered NdFeB Alloy in Aqueous Environments

   To capture the initial corrosion of sintered NdFeB alloys, a quasi-in situ investigation of the localized corrosion behavior was conducted in...

   Lin Yang, Jialu Ouyang, ... Guang-Ling Song in Journal of Materials Engineering and Performance

   Article 11 July 2023
   

10. Effect of Aging Temperature on Pitting Corrosion of AA6063 Aluminum Alloy

    The pitting corrosion tendency of the as-extruded AA6063 alloy was investigated in this study through immersion corrosion and electrochemical...

    Zhiqiang Chang, Liangwen Liu, ... Mei Yang in Metals and Materials International

    Article 04 January 2024
    

11. Corrosion behavior of austenitic stainless steel and nickel-based welded joints in underwater wet welding

    Marine structures such as ports, bridges, pipelines, vessels, and platforms are an essential part of modern infrastructure, where the use of...

    Leandro Vaccari, Thomas Scheithauer, ... Hans Jürgen Maier in npj Materials Degradation

    Article Open access 11 May 2024
    

12. Corrosion Engineering and Biomaterial Corrosion

    A metal begins to deteriorate through chemical or electrochemical reactions with its surroundings at the surface.

    Nabisab Mujawar Mubarak, Mahmood Anwar, ... Izman Sudin in Fundamentals of Biomaterials

    Chapter 2023
    

13. Dynamic covalent-crosslinked furan-modified CaCu₃Ti₄O₁₂/polyurethane composite-based triboelectric nanogenerator and its application in self-powered cathodic protection

    Providing a green and sustainable cathodic protection method for metal surfaces is the key to increasing the service life of equipment. Herein,...

    **n Chen, Yuting Ouyang, ... Yuqi Li in Journal of Materials Science: Materials in Electronics

    Article 15 September 2022
    

14. High-performance triboelectric nanogenerator based on ZrB₂/polydimethylsiloxane for metal corrosion protection

    Metal corrosion causes billions of dollars of economic losses yearly. As a smart and new energy-harvesting device, triboelectric nanogenerators...

    **ucai Wang, Naijian Hu, ... Min Chen in International Journal of Minerals, Metallurgy and Materials

    Article 11 October 2023

15. Effects of Aerobic and Anoxic Conditions on the Corrosion Behavior of NiCu Low Alloy Steel in the Simulated Groundwater Solutions

    The present work focused on investigating the corrosion behavior of NiCu low alloy steel in 0.05 M NaHCO ₃ solutions with different Cl ⁻ concentrations...

    **n Wei, Yupeng Sun, ... Wei Ke in Acta Metallurgica Sinica (English Letters)

    Article 04 December 2022
    

16. Corrosion protection performance of graphene-modified zinc-rich epoxy coatings under high-temperature and high-concentration NaCl solution

    In this study, physically exfoliated graphene was embedded in zinc-rich epoxy coatings with different zinc contents to study the corrosion protection...

    Jie Zhang, Yuying Zheng in Journal of Materials Science

    Article 01 August 2023
    

17. Plasma Electrolytic Modification of the Steel and Titanium Surfaces by Combined Cathodic Nitriding and Anodic Polishing

    Abstract —The possibility of increasing the wear resistance of the surfaces of grade 45 steel by 19.9 times and a VT6 titanium alloy by 3.6 times...

    S. A. Kusmanov, I. V. Tambovskiy, ... I. A. Kusmanova in Russian Metallurgy (Metally)

    Article 01 May 2023
    

18. High-Temperature Phase Transformation and Corrosion Behavior of Zn-Ni Coated Press Hardenable Steels

    Hot stam** of steel is an innovative process for producing components of higher strength with a significant weight reduction. Conventional hot...

    Rajdeep Mondal, Kuntal Sarkar, ... Shiv Brat Singh in Journal of Materials Engineering and Performance

    Article 10 August 2023
    

19. High throughput screening of localised and general corrosion in type 2205 duplex stainless steel at ambient temperature

    Bipolar electrochemistry is used to produce a linear potential gradient across a bipolar electrode (BPE), providing direct access to the anodic and...

    Yiqi Zhou, Sultan Mahmood, Dirk Lars Engelberg in International Journal of Minerals, Metallurgy and Materials

    Article 01 December 2023

20. 3D network-like SnIn₄S₈/TiO₂ for photoelectric electron storage and sustained cathodic protection applications in both light and dark conditions based on nanoarchitectonics

    Severe marine metallic corrosion urges extensive research on corrosion protection methods. Environment-friendly photoelectric cathodic protection...

    Guiying Lu, Mengmeng Sun, ... Chang Feng in Journal of Materials Science: Materials in Electronics

    Article 20 January 2023